Eicon Networks 1530 Guide de l'utilisateur télécharger pdf (Page 36)

Using your Eicon 1530 36

Saving and Resetting Configuration Settings

The web-based configuration interface makes it easy to save and restore configuration settings

on the Eicon 1530. This is useful for backup purposes, or if you intend to maintain several

different configurations. You can also reset all settings to factory defaults.

When you save the configuration settings, they are stored in a file on your computer.

Procedure

From the links at left, click ‘Maintenance’.

The maintenance menu appears with two options, ‘Firmware’ and ‘Configuration’.

Click ‘Configuration’ to display the ‘Configuration Maintenance’ page.

To save your configuration settings to disk, click ‘Backup’.

To restore a previously-saved configuration, click ‘Browse’, select the file, then click

‘Restore’. The backup file uses the extension .CFG.

To reset the Eicon 1530 to factory default settings, click ‘Reset factory settings’. Resetting

the Eicon 1530 to factory defaults will erase all your configuration settings, including the

system password. Consider backing up your current configuration before you reset to factory

defaults, just in case.

Note: If you changed the LAN IP address of the Eicon 1530 from its default setting of 192.168.1.1,

you will lose contact with the web configuration interface after the reset is complete. This is because

the reset will return the Eicon 1530 to its default of 192.168.1.1. To regain access to the Eicon 1530,

open the URL http://192.168.1.1.

You can also reset the box to factory settings by holding down the device Reset button for

15 seconds. See Resetting the Device via the Reset Button on page 30 for more information.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 161 162

Pas de commentaire

Eicon Networks 1530 Guide de l'utilisateur Page 36