Eicon Networks S93 Guide d'installation télécharger pdf (Page 63)

Installing Additional Components 63

8. Click the ‘Common’ tab in the ‘Diva Server TSP Configuration’ dialog box.

9. Enter the prefixes that should be added to the calling party number and connected

number for your TAPI application.

• If you are working behind a PBX, enter the prefix that is required for an external

line, e.g. ‘9’.

• Enter the area code prefix that should be added to the area code for all national

calls if necessary, e.g. ‘0’.

• Enter the international code prefix that should be added to the country code for all

international calls, e.g. ‘01’.

The Diva Server TSP always adds the PBX prefix (if enabled) and adds either the

national or the international prefix (if enabled). For example, using the prefixes given

above, a call with the international number 4317711 would be presented to the TAPI

application as 9 01 4317711.

10. Select the logging level that should be used for your Telephony Service Provider and

the Wave driver. The following options are available:

• None: No errors, warnings, or messages are logged.

• Errors Only: Only messages that affect the operation of the driver are logged.

• Errors and Warning: Messages that affect the operation of the driver and other

warnings are logged.

• Details: Complete status information on the driver and the ISDN connection is

given.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 129 130

Pas de commentaire

Eicon Networks S93 Guide d'installation Page 63