Eicon Networks CX1 Spécifications télécharger pdf (Page 90)

Across the Boards



Communications Device Drivers

Section 6 - MAINCON Driver Configuration

Page 240

cfSOFTWARE Confidential,



2000

6.14 MAINCON Panel D1

COMM Port Assignment

Configuration filename: MAINCFG.POR

Used by cf Device Drivers:

Name Description

9 CFXPROX, CFXPROI, CFXPRO IBM 3101 Protocol Converter

16 CFXDECX, CFXDECI, CFXDECN DEC VT100 Protocol Converter

17 CFX232X, CFX232I, CFX232N PC-to-PC RS232

21 CFXTTYX, CFXTTYI, CFXTTYN Async TTY

22 CFXTYMX, CFXTYMI, CFXTYMN Tymnet78

insert D1 (NEW SCREEN SHOT)

__________________

ACROSS-THE-BOARDS(r) Config

__________________

---Communication Port Assignments---

Comm Type --------------------- Parameters ---------------------

3 COMM I/O Port: 03E8 IRQ: 04

5 NASI Name: NACS01

7 INT14 Port: 07 Dialect: 0

Enter connection type (COMM, NASI, INT14). COMM is for a normal serial port,

NASI=NetWare Async Services, INT14=Interrupt 14h.

F10:write config Esc:Exit F1:help

1. General Format

This configuration file consists of 15 records. One for each configurable serial device in

Across the

Boards

/DOS. Each entry is 40 bytes long, and is identified by the first byte. If entries 1 or 2 are not

specified (the type byte is 00h), the normal COM1 and COM2 definitions will be assumed if the driver is

directed to open COMM ports 1 or 2. Any other COMM port must be defined in this configuration file.

Note that the definition of COM1 and COM2 may be changed. The second byte of each configuration

record is reserved, and must be set to 00h.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 231 232

Eicon Networks CX1 Spécifications Page 90