Eicon Networks DIVA T/A ISDN Modem Guide de l'utilisateur télécharger pdf (Page 112)

DIVA T/A ISDN Modem User’s Guide 112

Type following commands:

AT*Vn=

<ENTER>

where n is the number of the analog device.

Save the new settings so that they are available every time

you start the DIVA T/A. Type the following command:

AT&W

<ENTER>

where n is the number of the Profile (0, 1, or 2) to which you

want to save.

To restart the DIVA T/A, type:

Type ATZn <ENTER>

where n is the number of the profile number (0,1 or 2) you

want to be active.

VoiceMail is enabled but your message waiting indicator

light doesn’t go on when you have messages in your

VoiceMail box.

The DIVA T/A hardware you are using may not support the message

waiting indicator light. To check if the DIVA T/A you are using

supports this feature, follow these steps:

Start the terminal-emulation program (for example, Telix,

HyperTerminal, or HyperAccess).

Confirm you are connected to the DIVA T/A by typing AT and

pressing Enter. The DIVA T/A should respond with “OK”.

Type ATI20 and press Enter. The version number for your

DIVA T/A hardware (800-xxx-xx) is displayed. The message

waiting indicator light is only supported on the following

versions of the DIVA T/A hardware:

•

800-214-04 or later

•

800-145-04 or later

If your DIVA T/A hardware supports this feature and it is still not

working, check with your ISDN provider to find out if the “Message

Waiting Indicator” key is set to the appropriate value. See “Feature

Key Values” on page 102 for more information.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 121 122

Pas de commentaire

Eicon Networks DIVA T/A ISDN Modem Guide de l'utilisateur Page 112