Eicon Networks S93 Guide d'installation télécharger pdf (Page 52)

AT-command set of the Eicon ISDN Port 52

Supported AT commands for fax (excerpt of complete list)

The Port driver functions as a Fax Class 1 and Class 2 modem and it supports all

standardized AT +F commands. However, only the AT +F commands that can reasonably

be used manually are described below.

AT \V<n> Indication of connection parameters in CONNECT response.

n = 0 Connection parameters are not indicated.

n = 1 Connection parameters are indicated.

The connection parameters are displayed in the following format:

CONNECT <modulation>/<options>/<txspeed>:TX/<rxspeed>:RX>

modulation: V21, V22, V23, V32, V34, V90 etc. (see AT +MS command)

options: LAPM/V42BIS, LAPM, MNP5, MNP

txspeed: 300, 1200, 2400, ..., 33600 etc. (transmit rate)

rxspeed: 300, 1200, 2400, ..., 33600 etc. (receive rate)

AT #CID=<n> The Port driver indicates the origination and destination number in the

RING and/or CONNECT response. This enables a server application

for example to forward incoming faxes directly to their destination.

The information appended to the CONNECT or RING response can

have two formats:

Format 1: CID: xxx,

where xxx = calling party number

Format 2: CID: xxx DAD: yyy,

where xxx = calling party number and yyy = called party

number

n = 0 Turn CID off

n = 1 Turn CID on, RING with format 1

n = 2 Turn CID on, CONNECT with format 1

n = 3 Turn CID on, RING and CONNECT with format 1

n = 5 Turn CID on, RING with format 2

n = 6 Turn CID on, CONNECT with format 2

n = 7 Turn CID on, RING and CONNECT with format 2

n = ? Returns the current mode

Command Description

AT +FCLASS? Queries the configured modem class.

0 = Data Mode

1 = EIA Class 1

1.0 = EIA Class 1.0 (V.34 Fax)

2 = EIA Class 2

AT +FCLASS=? Displays all supported modem classes.

AT +FCLASS=<n> Configures the modem for modem class <n>.

AT +FMFR? Returns the name of the modem manufacturer.

Command Description

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 129 130

Pas de commentaire

Eicon Networks S93 Guide d'installation Page 52