Eicon Networks ISDN NT1 Spécifications télécharger pdf (Page 6)

6 Installing the Eiconcard C9x

Installing the Eiconcard C9x

Follow the steps below to install the Eiconcard C9x. If you want the

Eiconcard C9x to be available to multiple users on a LAN, install it

in the PC that will function as a gateway for the LAN.

1 Prepare the PC

Turn off the PC and disconnect its power cable. Remove the cover

of the PC according to the instructions that came with it.

2 Install the Eiconcard C9x

Drain static electricity from your body by touching the metal

chassis (the unpainted metal at the back of your PC).

Locate a slot in your PC that has the same bus type as your

adapter.

If your PC has both ISA and PCI slots, the PCI slots are shorter,

as shown.

Figure 1. Locating a PCI slot

If there is a metal plate at the end of the slot, remove it and keep

the screw.

Firmly insert the adapter into the selected slot.

To avoid damaging your hardware, insert the adapter

only into a slot with the same bus type as the adapter.

Inserting the adapter into any other type of slot can

damage your adapter, your PC, or both.

PCI slots

metal plates

ISA slots

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Pas de commentaire

Eicon Networks ISDN NT1 Spécifications Page 6