Eicon-networks 1550 Manuel d'utilisateur Page 13

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 157
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 12
Setup 13
System Requirements
This chapter describes how to connect a single computer to the Eicon 1550/1551.
Before you begin, review the system requirements, as outlined below.
For LAN setup instructions, see LAN Setup on page 30.
Networking Requirements
When connecting the Eicon 1550/1551 directly to a computer, the following is required:
A 10Base-T Ethernet network interface card, properly installed and configured to use
the TCP/IP protocol. A 100 Mbps Ethernet card can be used if the card supports
auto-sensing.
TCP/IP communications protocol configured to obtain its IP address automatically
(DHCP client), and not configured to use a DNS server.
If you are unsure about these topics, consult the documentation for your operating
system or network adapter for more information.
Web Browser Requirements
The Eicon 1550/1551 is configured via web pages stored on the device itself. To
access the web interface, you must have Netscape Navigator 4 or Microsoft Internet
Explorer 4, or later versions.
Additionally, your Web browser must be configured to connect to the Internet via a
local area network (LAN) and not through a proxy server.
An installer for Microsoft Internet Explorer is included on the Eicon 1550/551 CD-ROM
for all Windows operating systems except Windows 3.1. Windows NT 4.0 requires SP3
or later, available from http://www.microsoft.com/.
Configuration Worksheets
You may find the configuration worksheets, included in this guide, helpful for
configuring your settings. See Configuration Worksheets on page 142 for more
information.
Vue de la page 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 156 157

Commentaires sur ces manuels

Pas de commentaire